Hi ,
I’m enjoying Season 2 and am going to use Parrot colours to weave some towels. I want to make mine wider. If using Fibonacci sequence, do I increase by a percentage to maintain the ratio? For example for 20 ends, I’d make mine 20% wider, so 24. 30 would be 36 etc. Thank you for any advice.

I wanted to have 5 stripes. So Jane used 20, 30, 50, 80 and 120. How would I increase to get 5 stripes for a wider towel? Thank you.

Sorry - I was thinking of the first Fibonacci sample. Look at your design as 2, 3, 5, 8 & 13 and assign a different repeating number to the sequence. For instance if you use 12 ends as a starting point using the Parrot sample as your guide - you are starting with stripe 2 (12 x 2 = 24) so would have 24 ends in that stripe, the next columns would be 12 x 3 = 36 ends; 12 x 5 = 60 ends; 12 x 8 = 96 ends and 12 x 13 = 156 ends. Increase your outside border stripe to 10 on each side and the inside stripes to 5 and you will have a total of 412 ends divided by 18 epi would give you a width of 22.8" on your loom. Hope this helps. Read up on Fibonacci in Jane's PDF's this season or to a web search for his discovery - it's a fascinating. Also, here's an article about design that Jane has written and is on our Knowledge Base.

https://janestaffordtextiles.com/knowledge-base/design-for-weavers-fibonacci-and-division-of-space/